| Process Induced Residual Stress and Deformation in a Ring-Stiffened Composite Launching Tube |
| 關鍵詞： |
filament winding. |
| 類 別： |
復合材料 >> 樹脂基復合材料 |
| 來 源： |
2009年第四屆中歐增強高聚物工藝與性能國際學術會議（桂林，June 8-12) |
| 資料類型： |
pdf文件 |
| 資料大小： |
170K |
| 簡 介： |
Composite materials are being used to fabricate launching tubes for strategic missiles
due to their excellent specific strength and stiffness over traditional metal materials.
The favoured method of manufacture is filament winding. Depending on lay-up and
cure cycle, large localized residual stresses can be generated during processing which
could cause defects such as layer separation, micro-cracking and poor dimensional fidelity. |
| 上傳人： |
magicpower |
| 上傳時間： |
2009-08-05 10:21:53 |
| 下載次數： |
1 |
| 消耗積分： |
2 |
| 我要收藏： |
 |
| |
友情提示：下載后對該資源進行評論，即可獎勵2分。 |
|
本欄目部分資源來自互聯網，僅為促進數據共享和信息交流，如有版權問題請告知本網或上傳者本人，本網會及時給予答復。 |
| 報告錯誤
1.下載無效
2. 資料明顯無價值
3. 資料重復存在
|
