| Preparation and Thermal Properties of Phosphorus-containing Copolyester Nanocomposites with Carbon Nanotube |
| 關鍵詞： |
carbon nanotube phosphorus-containing copolyeste |
| 類 別： |
橡膠 >> 橡膠原料 |
| 來 源： |
2009高分子先進制造業論壇（青島） |
| 資料類型： |
pdf文件 |
| 資料大小： |
520K |
| 簡 介： |
Flame retardant nanocomposites were synthesized by melt-blending phosphoruscontaining
copolymer (PET-co-DDP) with multi-wall carbon nanotubes. PET-co-DDP was
copolymerized with terephthalic acid (TPA), ethylene glycol (EG) and 9, 10-dihydro-10[2, 3-di-
(hydroxy carbonyl)propyl]-10-phosphaphenanthrene-10-oxide (DDP). The structure of the
nanocomposites was characterized by scan electron microscopy (SEM). Fire property
measurements by cone calorimeter revealed that the incorporation of multi wall carbon nanotubes
into PET-co-DDP significantly reduced the peak heat release rates compared with the PET-co-DDP.
The thermal properties of the nanocomposites were investigated by thermogravimetric analysis
(TGA). It was found that the thermal stability of copolyester was improved by the addition of the
multi-wall carbon nanotubes. Char formation is the main factor for these improvements. The flame
retardant performance was achieved through the formation of a relatively uniform networkstructured
floccule layer covering the entire sample surface without any cracks or gaps. This layer
re-emitted much of the incident radiation back into the gas phase from its hot surface. |
| 上傳人： |
chem2000 |
| 上傳時間： |
2009-11-02 17:10:47 |
| 下載次數： |
1 |
| 消耗積分： |
2 |
| 我要收藏： |
 |
| |
友情提示：下載后對該資源進行評論，即可獎勵2分。 |
|
本欄目部分資源來自互聯網，僅為促進數據共享和信息交流，如有版權問題請告知本網或上傳者本人，本網會及時給予答復。 |
| 報告錯誤
1.下載無效
2. 資料明顯無價值
3. 資料重復存在
|
