| Surface modification of PBO fiber by coaxial atmospheric dielectric barrier discharge (PLA-PLA) |
| 關鍵詞： |
plasma treatment poly (1 4-phenylene-cis-benzobisoxazole) fibres atmospheric dielectric barrier di |
| 類 別： |
纖維 >> 合成纖維 |
| 來 源： |
ICAFPM 2011 |
| 資料類型： |
pdf文件 |
| 資料大小： |
3050K |
| 簡 介： |
Surface modifications of poly (1, 4-phenylene-cis-benzobisoxazole) (PBO) fibres by coaxial atmospheric dielectric barrier discharge (PLA-PLA) have been studied in this paper. The mixture of argon and oxygen was used as inlet gas. The modification effects were examined by means of scanning electron microscopy (SEM), contact angle measurement (CA), the fourier transform infrared spectroscopy (FTIR) and the interlaminar shear strength (ILSS) measurement. The results indicated that the surface of treated PBO fibres became rougher compared to the untreated, and the contact angle decreased significantly by 25.03% from 84.7°to 63.5°after Ar/O2 plasma treatment for 3 minutes. The FTIR spectra showed that the polar functional groups were introduced into the surface of the PBO fibres after the treatment. Therefore, the interlaminar shear strength (ILSS) of PBO/D03E composite could be improved from 3.3 to 7.6 MPa. |
| 上傳人： |
epce |
| 上傳時間： |
2011-09-28 15:06:53 |
| 下載次數： |
1 |
| 消耗積分： |
4 |
| 我要收藏： |
 |
| |
友情提示：下載后對該資源進行評論，即可獎勵2分。 |
|
本欄目部分資源來自互聯網，僅為促進數據共享和信息交流，如有版權問題請告知本網或上傳者本人，本網會及時給予答復。 |
| 報告錯誤
1.下載無效
2. 資料明顯無價值
3. 資料重復存在
|
