作者：吳國章
關鍵字：論文
論文來源：期刊
發表時間：2009年
[1] 柳修史，李寧，吳馳飛，吳國章*，“熱老化對丁苯膠乳體系機械穩定性的影響”，高分子學報，2009, (7), 627-631.
[2] 宋加坤，吳國章，“銅纖維長度對ABS／銅纖維復合材料導電性能的影響”，工程塑料應用，2009,37(7): 19-22.
[3] 周霆，吳國章，“層狀共連續PA6/SEBS體系的結晶取向及其低膨脹化機理研究”，高分子學報，2008, (9), 893-897.
[4] Q. Li, G. Wu, Y. Ma, C. Wu, “Grafting Modification of Carbon Black by Trapping Macroradicals Formed by Sonochemical Degradation”,Carbon, 2007, 45, 2411-2416.
[5] X. Yuan, F. Shen, G. Wu, C. Wu, “Novel in situ Coordination Copper Sulfate/Acrylonitrile- Butadiene Rubber Composite”, J. Polym. Sci. B: Polym. Phys., 2007, 45, 571-576.
[6] Y. Cao, Q. Li, L. Zhang, G. Wu, C. Wu, “Viscoelasticity of A Vitrified Hindered Phenol Compound During Thermal Annealing", Journal of Non-Crystalline Solids, 2007, 353, 4232-4235.
[7] C. Li, G. Wu, F. Xiao, C. Wu, “Damping Behavior of Sandwich Beam Laminated with CIIR/ Petroleum Resins Blends by DMA Measurement”, J. Appl. Polym. Sci., 2007, 106, 2472-2478.
[8] Q. Li, X. Zhang, G. Wu, S. Xu, C. Wu，“Sonochemical Preparation of Carbon Nanosheet from Carbon Black”, Ultrasonics Sonochemistry, 2007, 14, 225-228.
[9] X. Yuan, F. Shen, G. Wu, C. Wu, “Effects of Acrylonitrile Content on the Coordination Crosslinking Reaction between Acrylonitrile–Butadiene Rubber and Copper Sulfate”，Materials Science and Engineering: A, 2007, 459, 82-85.
[10] 袁曉芳，吳國章，吳馳飛，“硫酸銅含量對硫酸銅與丁腈橡膠之間配位交聯反應的影響”，高分子學報，2007，(3), 272-276.
[11] X. Yuan, G. Wu, C. Wu, “Effect of Crystal Water on Coordination Crosslinking Reaction between Copper Sulfate and Acrylonitrile-Butadiene Rubber”，Chemical Journal of Chinese Universities-Chinese，2006，27, 1978-1981.
[12] 吳馳飛，郭衛紅，吳國章等，“原位接枝有機化合物的納米炭黑及其制造方法”，US Patent, 11/390, 621(2006).
[13] C. Wu, G. Wu, C. Wu, “Dynamic Mechanical Properties in Blends of Poly(styrene-b-isoprene -b-styrene) with Aromatic Hydrocarbon Resin”, J. Appl. Polym. Sci., 2006, 102, 4157-4164.
[14] Q. Li, G. Wu, X. Zhang, C. Wu, “Preparation of Poly (n-Butyl acrylates) Encapsulated Carbon Black via Ultrasonic Irradiation Initiating Emulsion Polymerization”, Polymer Journal, 2006, 38, 1-6.
[15] H. Yui, G. Wu, H. Sano, M. Sumita, K. Kino, “Morphology and Electrical Conductivity of Injection-Molded Polypropylene/Carbon Black Composites with Addition of High-Density Polyethylene”, Polymer, 2006, 47, 3599-3608.