作者：Ming Wang et al
關鍵字：Polymer brushes, Polymer nanocomposites, Multilayer coextrusion
論文來源：期刊
發表時間：2013年
[1] Ming Wang*, Haixia Li,
Xing Tang, Xingliang Huang, Effect of calcium stearates and zinc stearates on
polyene formation of Poly (vinyl chloride) under degradation, Journal of
Elastomers & Plastics, 2013, 45(2),173-186.
[2] Ming Wang, Jiabin Shen,
Jiang Li, Shaoyun Guo, Effect of morphology on the interfacial slip of
immiscible polypropylene/polystyrene blends, Rheological Acta, 2013, 52, 963-972.
[3] Tim S. Kelby, Ming Wang,
Wilhelm T.S. Huck, Controlled Folding of 2D Au–Polymer Brush Composites into 3D
Microstructures, Advanced Functional Materials, 2011,21(4), 652–657.
[4] Ming Wang, Jean E. Comrie, Yunpeng Bai, Ximen He, Shaoyun Guo and Wilhelm T.
S. Huck, Formation
of hierarchically structured polymer thin films, Advanced Functional Materials, 2009, 19, 2236–2243.
[5] Ming
Wang, Jiayou Xu, Hong Wu,
Shaoyun Guo, Effect of pentaerythritol and organic tin with calcium/zinc
stearates on the stabilization of poly(vinyl chloride), Polymer Degradation and Stability, 2006, 91(9), 2101-2109.
[6] Jiabin Shen, Ming Wang, Jiang Lia, Shaoyun Guo, In situ fibrillation of polyamide6 inisotactic polypropylene
occurring in the laminating-multiplying die, Polymers Advanced Technologies, 2011, 22(2),
237-245
[7] Jiabin Shen, Ming Wang, Jiang Li, Shaoyun Guo, Shuangxi Xu, Yuqing Zhang, Ting
Li, Ming Wen, Simulation of mechanical properties of multilayered
propylene–ethylene copolymer/ethylene 1-octene copolymer composites by
equivalent box model and its experimental verification, European Polymer
Journal, 2009, 45, 3269–3281.
[8] Shuangxi Xu, Ming Wen, Jiang Li, Shaoyun Guo, Ming Wang, Qin Du, Jiabin Shen, Yuqing
Zhang, Songling Jiang, Structure and properties of electrically conducting
composites consisting of alternating layers of pure polypropylene and
polypropylene with a carbon black filler, Polymer, 2008,
49(22), 4861-4870.
[9] 王明*，張盼盼，白曉玉，聚氯乙烯/氧化石墨烯薄膜的力學性能和熱穩定性能；材料研究學報；2012，4，390-395
[10] 黎海霞，黃興亮，易麗，王明*，馬來酸鹽對聚氯乙烯熱穩定性的影響, 材料研究學報；2012，6，637-642.
[11] 王明*，唐興，原位聚合聚氨酯/納米二氧化鈦復合材料的研究；工程塑料應用；
2011, 39(5), 20-24.
[12] 馬軍、李海燕、王明*，刺激響應型聚合物刷的研究進展；高分子通報；2011, 2, 37-46.
[13] 侯攀、周科勇、王明*，抗靜電劑在高分子材料中得應用研究進展；中國塑料； 2011, 25(7)，11-16.
[14] 王 明，沈佳斌，杜 芹, 許雙喜, 李 姜，陳光順，郭少云， EPDM/PS交替多層復合材料的力學性能分析；復合材料學報；2007，24(6)，36-43.
[15] 王 明，郭少云，微納多層功能復合材料的制備新技術；工程塑料應用；2008，36(11)，4-8
[16] 沈佳斌，王 明，李 姜，杜 芹，許雙喜，陳光順，郭少云，丙烯-乙烯共聚物/乙烯-1-辛烯共聚物層狀復合材料的力學性能研究；高分子學報；2007，9，817-832.
[17] 杜 芹，郭少云，李 姜，王 明，沈佳斌，許雙喜，蔣松霖，陳 蓉，高密度聚乙烯/尼龍6共混物的形態結構對其性能的影響；高分子材料科學與工程；2008, 24(6), 88-91.
[18] 許家友，王 明，郭少云，一種Ca/Zn/Sn復合穩定劑及其性能的研究；聚氯乙烯；2006，9，20-24
[19] 王 明，李忠明，三元乙丙橡膠的改性與應用現狀；四川化工與腐蝕控制；2003，4(6)，27-31